HT Automatic Voltage Stabilizer (HT AVR / HT Servo Stabilizer)
High Tension (HT) Automatic Voltage Stabilizer or HT AVR or HT-Automatic Voltage Regulators or are the high-tension stabilizers. Although It protects electrical equipment from the overloading of voltage. Balaji Power Automation Make Copper wound HT AVR suitable for indoor as well as outdoor installation. Copper wound HT AVR system is a revolutionary landmark in the industry when it comes to voltage regulation and stabilization. Especially After the installation of standard distribution transformer the problem of low/high voltage on the LT loss of a plant. The standard off – circuit tapping of transformers is limit tapping. It can correct limited voltage variation and cannot regulate the voltage while in ‘on Load’ conditions. Additionally, these stabilizers also prevent the transformer and other electrical equipment from getting overload. In addition to this, We are one of the best HT AVR Manufacturers in India.
|Brand||Balaji Power Automation (BPA), Ghaziabad|
|Power||250kva – 1000kva(10MVA)|
|Input Voltage||8-12kv / 9-12kv|
|Output Voltage||11kv/ 22v/ 33v|
We Balaji Power Automation develops state of the art technology H.T. Automatic voltage stabilizer. That operates on load, sleeplessly & gives stabilized voltage on the HT side. Thus, the fluctuating voltage from Grid is initially control by the HT AVR. And then fed to the transformer resulting in the constant HT Output within ± 1% accuracy. And the biggest advantage being its robust design; Lesser losses & more efficiency make the distribution transformer to utilize up to 100% capacity.
Therefore whenever there is fluctuation in HT, it also gets reflects in LT. Standard off circuit tapping can correct limited voltage variation. And cannot regulate it completely but HT Automatic Voltage Regulator performs the function effectively with a ±1% deviation.
HT Automatic Voltage Regulator/Stabilizers
We also manufacture and suppliers of H.T Automatic Voltage regulator and HT Servo Stabilizer. Meanwhile, Our HT AVR operates on load continuously and provides a stable voltage on the HT side. Additionally, Everyone confuses about Ht Stabilizers & HT automatic Voltage Regulators & HT Automatic Voltage Stabilizer all are the same.
We also make & one of Best HT AVR Stabilizers & HT Servo voltage stabilizers in India Upto 10 MVA. Voltage fluctuations not only cause breakdowns but also impacts the other aspects of production severely.
Construction of HT Automatic Voltage Stabilizer:-
H.T. Automatic Servo Voltage Stabilizers have helical coils mounted on a conventional laminated core. Also, Carbon rollers are assembly on a fiberglass carrier board and are traverse to the length of the coil track. The rollers connect to the electric output terminals Nearby the regulating coil. a number of compensating winding connect in parallel. That is short-circuiting to reduce the effect of core-flux fringing. It also keeps the reactance of the regulator constant at any position of the rolling contact.
Advantages of HT Automatic Voltage Stabilizer:-
- Utilization of the Distribution Transformer is to its full capacity as the H.T. AVR shares the load of the Transformer and the connected load.
- Losses are less as the incoming voltage either low or high is correct at the initial stage only.
- Therefore, Fluctuations in the HT Supply are not passing on to the Distribution Transformer.
- Installation Cost is less in comparison to L.T. Automatic Servo Voltage Stabilizer for higher ratings.
- Single Unit of HT Automatic Servo Voltage Stabilizer can connect to more than one Distribution Transformer.
- Economical for huge capacities like 2500 KVA and above or for wide voltage fluctuation range (eg. 8 KV – 13 KV, 28 KV – 36 KV, etc.)
- Output Voltage of H.T. AVR remains constant at any connected Load and up to full load.
Above all, the Advantage of H.T Automatic Voltage Stabilizers makes us the best among all.
Thus, these HT-Automatic Voltage Regulators use in industries and the commercial sector for a stable input voltage.