Rolling Contact type servo stabilizer

Rolling Contact Type Servo Stabilizer is an extremely relevant component for units facing electricity breakdowns as well as fluctuations. In this case, We at Balaji Power Automation, provide rolling contact type servo stabilizers which prevent direct exposure and reduces the possibility of breakdown as even a minor fluctuation can cause severe damage to the entire system. Rolling Contact Type Stabilizer shields appliances by maintaining a proper voltage supply output during the time of power fluctuation.

Components of Balaji Power Automation Rolling Contact Type Stabilizer:

  • Voltage regulators with carbon assembly
  • Carbon wound buck n boost series transformer

Balaji Power Automation’s Rolling Contact Type Servo Stabilizers are available in the following variants:

  • Outdoor
  • Indoor naturally oil
  • Air-cooled units

With wide input ranges and with balanced/unbalanced supplies depending on the voltage condition, its standard technical specifications are as follows:

Rolling Contact type servo Voltage regulator is also known as Rolling Contact Type Servo Stabilizer.

Basically Rolling Contact type servo voltage regulator and servo stabilizer are the same. Both the things, it only a different name Nothing as. If you still any doubt or need Clarification on this you can also contact us.

Different Type of Voltage Stabilizers:

Our product range includes a wide range of voltage stabilizers. Such as rolling contact type linear servo voltage stabilizers, industrial voltage stabilizers, industrial voltage stabilizers, and automatic voltage stabilizers. In spite of this, we are one of the best manufacturers & suppliers of Rolling Contact Type Servo Stabilizer. And also the best manufacturer of Servo Voltage regulator India.

The rolling contact type voltage controllers/ Rolling Contact type servo stabilizer – 3 Phase Servo Voltage Stabilizer are useful to protect electrical appliances. In like manner by supplying a steady output voltage in the situation of fluctuating input voltage. Developed with excellent insulation and winding, these voltage controllers are ideal for both indoor as well as outdoor electrical installation. The high-quality relay setting. In the situation of single phasing, the motor is capable of withstanding the high current. And the relay will also trip in 40-50 seconds ensuring complete security.

Advantages:
  • Energy-saving ranging from 5% to 10%.
  • Reduction in breakdown of the electrical equipment.
  • Reduced Electricity Bill.
  • Wear & Tear of the carbon is minimal. Due to the frictionless and smooth surface of the winding track and rolling mechanism of the carbon roller.
  • Better current-carrying conductor as a copper strip instead of copper wire.
  • Low No Load Losses due to the use of pure CRGO core.
  • Inspection of Carbon Roller done without taking out the whole assembly.
  • In case of failure of the automatic controller. The operation can shifts to motor control, in case of failure of the motor; the same can be shifts to manual mode.
  • Efficiency Of Balaji Power Automation L.T. Automatic Servo Voltage Stabilizer is approx. 98% to 99%.
  • The installation also in Indoor services.
  • Life of Balaji Power Automation L.T. Automatic Servo Voltage Stabilizer under normal working conditions is 15 – 20 Years.

Applications
Rolling Contact Type Voltage controllers have their prime use in supplying steady output voltage despite fluctuations of the input voltage. These stabilizers also use in below industries:

  • Cement Plant
  • Distilleries & Beverages
  • Food Processing Units
  • Flour Mills Engineering Units
  • Cold Storage
  • High Buildings Hospitals & Nursing Home etc
  • Pharmaceutical Units
  • Paper Mills
  • Rolling Mills
  • Textile Mills
  • Rubber Industries

Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)

error: Copyright © Balaji Power Automation, Ghaziabad