H.T. 2 IN 1 COMBO

Generally, we know that the normal distribution transformer Steps-Down the voltage from high tension to low tension. For the bulk power purchase HT supply is applicable. which used to take 11 kilo Volts and above. But in the Individual houses, shops, small offices basically get the electricity on Lt connection. Due to all this the fluctuation in the voltage cannot be controlled. And of the times, at most of the sites we saw that the fluctuation in the voltage is remain fluctuated. It leads to the damage of the electronic and the electrical items.

H.T. Transformer is built in High tension (HT). With the help of Automatic Voltage Stabilizer, the fluctuation problem in the voltage has been solved rapidly. without any problem and damage. We can say that the Automatic Voltage stabilizers is the gift from our supreme technology. Our Automatic Voltage stabilizers manufacturers uses the superior technique to make this happen. Basically, the fluctuation problem is totally in control after using these spectacular devises by Balaji servo stabilizer. Our items can be used in various industrial and commercial applications.

Our unit of stabilizers are the combination of H.T. Automatic Voltage Stabilizer and standard H.T. Distribution Transformer. The availability of these devices is up-to 10,000 KVA in 11 KV & 33 KV Class. HT 2 in 1 combo is a H.T. Transformer which is built with Automatic Voltage Stabilizer. Due to this the voltage cannot get in load condition. Which is the reason of fluctuation. So due to our products there is big relief form this serious problem. Your electrical items are now safe and not get damaged. Because of our product the limited voltage variation is transferred. And can regulates in load condition. If you do not have install this so do not get delay to use this. Because the only way to solve this problem is by installing the highly efficient Power Star H.T. Transformer with Built in H.T. Automatic Voltage Stabilizer.

Working:-

The fluctuating voltage from electricity authority input is initially stabilized by the Built-In H.T. Automatic Voltage Stabilizer and then fed to the Transformer, providing constant L.T. Output within ± 1% accuracy.

A normal distribution transformer generally Steps-Down the voltage from H.T. to L.T., however it cannot take care of the fluctuating voltage and most of the times and at most of the sites, it has been realized that, the problem of fluctuating voltage remains, resulting in improper function of electrical systems. H.T. Transformer with Built In H.T. Automatic Voltage Stabilizer provides total solutions for voltage fluctuation and stabilization. The unit is basically a combination of H.T. Automatic Voltage Stabilizer and standard H.T. Distribution Transformer working in conjunction. These are available up to 5000 KVA in 11 KV & 33 KV Class.

Standard transformers can correct limited voltage variations and cannot regulate the voltage in ‘on load’ condition. The only smart way to tackle this problem is by installing highly efficient Power Star H.T. Transformer with Built In H.T. Automatic Voltage Stabilizer. These systems can be used in various industrial and commercial applications.

Advantages:-

• Space saving
• Better Efficiency
• Production of motor etc.
• Reduced Installation Cost
• Reduction in electricity Bill
• Improvement in power factor(Only in case of high voltage)
• In Higher capacity it is technically advisable to install H.T. AVR  Because current in L.T. AVR is  very high.
• Losses of transformer will reduce after installation of HT 2 in 1 combo